(SKU:DFR0287)LCD12864 shield 兼容Arduino
来自DFRobot Product Wiki
目录 |
概述
LCD12864 Shield采用12864点阵液晶制作的一款显示扩展板,为Arduino控制器提供显示单元。
可直接插接到大部分Arduino控制器上使用,可显示中文、英文、图片等。
模块具有5个模拟扩展端口和8个数字扩展端口,可连接DFRobot大部分的模拟或数字传感器,还具有一个小型的手机摇杆,可实现5个按键操作。
LCD12864 Shield是项目开发和制作互动作品不可多得的显示器。
技术指标
- 模块接口:Arduino兼容
- 占用端口:模拟口0,数字口7,8,9,10,11,13
- 工作电压:3.3V
- 液晶点阵:128x64
- 1个复位按键
- 1个手机摇杆,实现5个按键操作(占用模拟口0)
- 具有背光控制(占用数字口7)
- 5个模拟接口,8个数字接口扩展
- 调用库文件可直接使用Arduino控制器驱动
- 尺寸:60x55x20mm
库文件
下载后将文件解压,把U8glib文件夹复制到arduino-1.0.4\libraries中。
使用IDE打开例程,会发现有很多设备驱动被屏蔽掉了,需要找到我们设备的驱动文件,我们的设备选择U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);
将它前面的//删除掉即可,下载成功后会发现液晶的对比度太深,那么我们需要修改库文件中的一些参数来调整对比度。
对比度调整,需要找到arduino-1.0.4\libraries\U8glib\utility文件夹中的u8g_dev_st7565_nhd_c12864.c,
将0x008, /* contrast: 0x008 is a good value for NHD C12864, Nov 2012: User reports that 0x1a is much better */
这行代码的0x008, 修改为0x000, 保存文件即可,重新下载例程,就会发现对比度调整好了。
示例代码
/* # This sample codes is for testing the LCD12864 shield. # Editor : Mickey # Date : 2013.11.27 # Ver : 0.1 # Product: LCD12864 shield # SKU : DFR0287 */ #include "U8glib.h" // setup u8g object, please remove comment from one of the following constructor calls // IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8 #define KEY_NONE 0 #define KEY_PREV 1 #define KEY_NEXT 2 #define KEY_SELECT 3 #define KEY_BACK 4 uint8_t uiKeyCodeFirst = KEY_NONE; uint8_t uiKeyCodeSecond = KEY_NONE; uint8_t uiKeyCode = KEY_NONE; int adc_key_in; int key=-1; int oldkey=-1; // Convert ADC value to key number // 4 // | // 0 -- 1 -- 3 // | // 2 int get_key(unsigned int input) { if (input < 100) return 0; else if (input < 300) return 1; else if (input < 500) return 2; else if (input < 700) return 3; else if (input < 900) return 4; else return -1; } void uiStep(void) { adc_key_in = analogRead(0); // read the value from the sensor key = get_key(adc_key_in); // convert into key press if (key != oldkey) // if keypress is detected { delay(50); // wait for debounce time adc_key_in = analogRead(0); // read the value from the sensor key = get_key(adc_key_in); // convert into key press if (key != oldkey) { oldkey = key; if (key >=0){ //Serial.println(key); if ( key == 0 ) uiKeyCodeFirst = KEY_BACK; else if ( key == 1 ) uiKeyCodeFirst = KEY_SELECT; else if ( key == 2 ) uiKeyCodeFirst = KEY_NEXT; else if ( key == 4 ) uiKeyCodeFirst = KEY_PREV; else uiKeyCodeFirst = KEY_NONE; uiKeyCode = uiKeyCodeFirst; } } } delay(100); } #define MENU_ITEMS 6 char *menu_strings[MENU_ITEMS] = { "LCD12864 Shield", "www.DFRobot.com", "Temperature", "Humidity" ,"About","OK"}; uint8_t menu_current = 0; uint8_t menu_redraw_required = 0; uint8_t last_key_code = KEY_NONE; void drawMenu(void) { uint8_t i, h; u8g_uint_t w, d; u8g.setFont(u8g_font_6x12);//4x6 5x7 5x8 6x10 6x12 6x13 u8g.setFontRefHeightText(); u8g.setFontPosTop(); h = u8g.getFontAscent()-u8g.getFontDescent(); w = u8g.getWidth(); for( i = 0; i < MENU_ITEMS; i++ ) { d = (w-u8g.getStrWidth(menu_strings[i]))/2; u8g.setDefaultForegroundColor(); if ( i == menu_current ) { u8g.drawBox(0, i*h+1, w, h); u8g.setDefaultBackgroundColor(); } u8g.drawStr(d, i*h+1, menu_strings[i]); } } void updateMenu(void) { switch ( uiKeyCode ) { case KEY_NEXT: menu_current++; if ( menu_current >= MENU_ITEMS )menu_current = 0; menu_redraw_required = 1; break; case KEY_PREV: if ( menu_current == 0 )menu_current = MENU_ITEMS; menu_current--; menu_redraw_required = 1; break; } uiKeyCode = KEY_NONE; } void setup() { u8g.setRot180();// rotate screen, if required menu_redraw_required = 1; // force initial redraw //Serial.begin(9600); } void loop() { uiStep(); // check for key press updateMenu(); // update menu bar if ( menu_redraw_required != 0 ) { u8g.firstPage(); do { drawMenu(); } while( u8g.nextPage() ); menu_redraw_required = 0; } }